The Standard Signal Modes for PC Monitor
Resolution
Vertical Frequency Horizontal Frequency Clock Frequency
Polarity
(H
V)
(kHz)
(Hz)
(MHz)
(Vert./Hor.)
640
480
31.469
59.94
25.175
-/-
640
480
37.861
72.809
31.5
-/-
640
480
37.5
75
31.5
-/-
720
400
31.469
70.087
28.322
-/+
800
600
35.156
56.250
36
+/+
800
600
37.879
60.317
40
+/+
800
600
48.077
72.188
50
+/+
800
600
46.875
75
49.5
+/+
1024
768(Optimal)
48.363
60.069
65
-/-
1024
768
56.476
70.069
75
-/-
1024
768
60.023
75.029
78.75
+/+
When you use it as a PC monitor, depending on signals of a PC, it may not display
picture normally even though it is set for standard mode resolution.
5-2. Setting Picture
-
Brightness
: Adjust screen brightness
-
Contrast :
Adjust screen contrast
-
Phase :
In case picture is not optimally set after auto-adjustment, use Phase function.
-
H. Size :
Adjust the Size of the screen.
-
H. Position :
Adjust the H position of the screen.
-
V. Position :
Adjust the V position of the screen.
-
Auto Adjustment :
Automatically resets its all settings to optimize the picture quality.
49
PAL/SECAM
EN 48
15 TFT-LCD TV
5-1. Auto Adjustment
When the set is connected to a PC, the MODE should be set as PC RGB Mode.
- Press
button on the remote control synchronize the TV set
with the PC.
- When it is used as PC monitor
Optimal Resolution : 1024 x 768 @ 60Hz
- Picture may not be displayed properly in any resolution other than the optimal
resolution.
- Even though it is automatically adjusted, it may display picture depending on signals
from a PC and in this case, It is then recomended to use Auto Adjustment function.
- Also, it can be set in OSD menu by using JOG button.
AUTO
