-18-
USER PROGRAMS
1.
Select User 1 or User 2 via the Program keys then press
Enter. Note that the dot matrix display portion will have a
single row of dots at the bottom (Unless there is a previously
stored program). If there is a program stored under the
button that is pressed, it will be retrieved. If not, you have the
option of programming in your first name. The message
window will display and flash the letter”A”. To change it,
press the up key, then “B” will be displayed; if the down key
is pressed, the letter “Z” will be displayed. After selecting the
appropriate letter, press enter. The letter “A” will again be
displayed and blinking. Repeat the procedure until all letters
of your first name are programmed(7 characters maximum).
When your name is displayed, press Stop and it will be
stored under either User 1 or User 2. If a user program was
previously saved you will be asked if you want to delete this
program.
2.
Next the Message window is flashing Age. Use the Up/Down
keys to adjust. Press Enter. This is a must to continue even if
age is not adjusted.
3.
The Message window will now be blinking a body Weight
value. Enter your body weight and press Enter.
4.
The Time window will now be blinking a Time value. Adjust the Time and press Enter.
5.
The first column (segment) will now be blinking. Using the Fast / Slow or Quick keys, adjust the
speed level to your desired effort for the first segment then press enter. The second column will
now be blinking. Repeat the above process until all segments have been programmed. The first
column will be blinking again. This is for the incline programming. Repeat the above process to
program all segments for incline.
6.
Press the Start button to begin the workout and also save the program to memory.
7.
The profile picture will be re-scaled to fit in the window, but the actual speed and incline settings
will remain the same as programmed.
