Customer Service 1-888-707-1880
11
Dyaco Canada Inc. 2016
Email: [email protected]
ASSEMBLY
STEP 7
1. Attach the Support tube (
26
) between the upright tubes (
4
&
5
) with four
Button Head Socket Bolts (
159
). Tighten bolts firmly.
2. Place the Beverage Holder (
158
) on top of the Support tube (
26
) as
shown in the illustration.
3. Place the magnet of the safety key (
75
) in between the Start and Stop buttons
(if it isn’t already attached).
The treadmill will not function without this in place.
4. Check to make sure all bolts and screws are completely tightened.
ASSEMBLY
STEP 8
1. Finish tightening the button head bolts (from Step 2 above) that secure the
Console masts to the frame.
2. Attach the Frame Base Covers (
62 & 63
) to the Frame Base (
2
) with six
Tapping Screws (
120
). Tighten screws using the Combination M5 Allen
Wrench & Phillips Head Screwdriver (
131
).
7
#159
. 5/16"
×
3/4" Button
Head Socket Bolts (4 pcs)
#75
. Safety Key
HARDWARE STEP7
8
#120
. 5
×
16mm
Tapping Screws (6 pcs)
HARDWARE STEP8
