9
ASSEMBLY INSTRUCTIONS
1
ASSEMBLY
STEP 1
1. Remove the treadmill from the carton and position it aside on a
smooth, level floor. The rear should be at least 3’ from any wall.
Do not remove the Velcro belt until you have removed the plastic
wrap and Styrofoam from beneath the unit.
Turning the unit on its
side after removing the belt may cause the unit to fold up and
cause serious injury!
2
ASSEMBLY
STEP 2
1. Slide the Console Mast Tube Covers (
99
&
112
onto
5
and
98
&
114
onto
4
) onto the left and right Console Mast Tubes.
Make sure the holes of
99
&
98
face the outside on each side.
2. Connect the Lower Computer Cable (
32
) with the Middle
Computer Cable (
33
) on the right side.
Before attaching the hardware to Step 3, make sure the cables you
just connected don’t get pinched in between the steel tubing. If
they do, this may cause issues that prevent the treadmill from
operating properly.
Summary of Contents for S77
Page 1: ...OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL ...
Page 30: ...30 EXPLODED VIEW DIAGRAM ...
Page 35: ...35 ...
Page 36: ......
