Dyaco Canada Inc. 2014 [email protected]
9
#71.
3/8" ×1-1/2"_
Carriage Bolt (1 pc)
#72.
Ø3/8" × Ø30 × 2T_
Flat Washer (1 pc)
#104.
5/16" × 5/8"_
Button Head Socket Bolt
(2 pc)
#33
. Ø5/16" × Ø18 ×
1.5T_Flat Washer (2 pcs)
#35.
Ø5/16" × 1.5T_
Spring Washer (2 pcs)
2
STEP
HARDWARE
STEP 2
1. Install
the
Handle Bar (3) on
the
Console Mast (2)
Gather
the Handpulse Assembly(97) through the Console Mast
and
Console mounting plate and use
the
Combination M5
Allen
Wrench & Phillips Head Screw Driver(43) to tighten
2pcs
of 5/16" × 5/8"_Button Head Socket Bolt(104), 2pcs
of
Ø5/16" × 1.5T_Spring Washer(35)and 2pcs of Ø5/16" ×
Ø18 × 1.5T_Flat Washer(33)
to the
Console Mast (2).
2. Take apart (
three
M8 x 7T nut
s
and
three
Ø8 × Ø20 × 1.5T
flat washer
s
(A)) under the seat (20). Locate
the
sliding
seat mount
(7)
under the seat and use
the
13mm/15mm
open end wrench (79)
to tighten three M8 x 7T nuts and
three Ø8 × Ø20 ×
1.5Twashers.((A) attach
ed
under the
seat
).
3.
Use
1pcs of 3/8" × 1-1/2" Carriage Bolt (71) to go Through
the
Seat (20) and
the
Inner Slide (6) then tighten with 1pcs
of Ø3/8" × Ø30 × 2T Flat Washers (72)
and the seat knob
(52).
