18
Dyaco Canada Inc. 2018
PAUSE/STOP/RESET FEATURE
1.
When the treadmill is running the pause feature may be utilized by pressing the
STOP
key once. This will
slowly decelerate the tread-belt to a stop. The Time, Distance and Calorie readings will hold while the
unit is in the pause mode. After five minutes the display will reset and return to the start up screen.
2.
To resume your exercise, when in Pause mode, press the
START
key. The speed will return to their
previous settings.
Pause is executed when the
STOP
key is pressed once. If the
STOP
key is pressed a second time the
program will end. If the
STOP
key is pressed a third time, the console will reset.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note
: This is only a rough guide used for comparison of different exercise sessions, which cannot be used for
medical purposes.
TO TURN TREADMILL OFF
1.
Remove tether cord.
2.
Turn off the main switch on the front of the treadmill, below the motor cover.
TO TURN OFF AUDIBLE BEEP
1.
If you want to turn off the audible beep sound that occurs when you press keys, etc., press the
MUTE
button on the top left of the console.
WINDOW
DISPLAY
SCAN:
Each parameter will take turns to display the exercising data for 5 seconds.
SPEED:
Displays the current running speed from 0.8 KPH ~ 6.0 KPH.(0.5MPH~4.0MPH)
TIME:
Accumulates total workout time from 00:00 to 99:59.
STEP:
Accumulates total steps on training from 0 to 9999.
DISTANCE:
Accumulates total workout distance from 0.00 to 99.99 Kilometers (99.99Miles).
CALORIES:
Accumulates the user’s calories consumption during exercise. Max. Value is 999.9
calories.
Note:
This is only a rough guide used for comparison of different exercise sessions,
which cannot be used for medical purposes.
FUNCTION
BUTTON
ENTER:
Press “ENTER” button to set the parameter of count down. When the belt stop running
which press and hold this button for 3 seconds to reset all data which the parameter
value of accumulating is. Use the “ENTER” button to confirm stride length setting.
START:
Press “START” button to begin training.
STOP:
Press “STOP” button to control stop training.
SPEED
:
Press “FAST” button to increase your speed, each increment is 0.1KPH (0.1MPH).
SPEED
:
Press “SLOW” button to decrease your speed, each decrement is 0.1KPH (0.1MPH).
STRIDE LENGTH:
To set one step stride length, adjust the range from 30 ~ 99 centimeter. (See page 20)
