© CASWA Pty Ltd – 2012
13 | Page
4.5.1
Selecting the Input Signals
The input tab allows you to select what signals
will be sent to the bound device when each of
the AirWay inputs is activated.
Additionally, currently active inputs are
highlighted.
Shown here are two example configurations,
one that might be used when the AirWay being
configured is bound to a second AirWay unit and
a simple 1 to 1 mapping of inputs and outputs is
required
The second example would be typical of an
AirWay unit bound to a Liftlog or LiftlogXL and
configured to send long travel signals.
4.5.2
Configuring the Outputs
The Outputs tab allows you to select normally open
or normally closed (inverted) behaviour of the
output relays.
Additionally, currently active outputs are highlighted.
