2. Important safety information
• When using electrical appliances basic safety precautions should always be followed.
• Check that the voltage indicated on the rating plate corresponds with that of the local network before
connecting the appliance to the mains power supply.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Children shall not play with the appliance.
• Do not operate the appliance with a damaged plug or cord, after a malfunction or after being dropped or
damaged in any way.
• If the supply cord is damaged, it must be replaced by a qualified engineer in order to avoid injury or
hazard.
• The soldering iron must be placed on its stand when not in use.
• Ensure there is sufficient space and ventilation around the appliance to allow the escape of heat and/or
fumes.
• Never place the product or part of it in water or operate it if your hands are wet.
• Wear appropriate clothing and safety goggles while soldering.
• Soldering work must be conducted on a stable, non-combustible surface.
• Do not touch any metallic parts near the soldering tip/nozzle.
• Do not leave the soldering iron unattended while it is switched on.
• Wash your hands thoroughly after working with solder.
• Make sure the power switch is in the “off” position and disconnect the plug when the unit is not in use.
• Before storage, ensure the power is off and allow the station to cool down to room temperature.
3. Features
Soldering station
• Long-life heating element for rapid heating.
• LED digital temperature display to show the working temperature and states, easy for operation.
• This soldering station is with an innovative heater and sensor combination that provides you a quick
heat-up and rapid temperature recovery.
• The handle rubber grip allows for continuous use without fatigue or heat discomfort.
• A durable heating element for long life and quick response time.
Soldering Iron
Soldering iron with a power of 60W(Max 90W) and a wide spectrum of soldering tips(N9 series)can be used
anywhere in the electronics field.
The high power and slim design makes this iron suitable for fine soldering work. The heating element
