The control panel is an operation control module which mainly controls the power
on and
off,
moving forward and backward during driving and display of battery
power level.
Notice: Do not place the control panel in the wet areas. If the control panel is
damped, please operate and use it after being fully dried.
4.3
Power switch
01) Turning the power on/off using the key (as shown in
Figure 5)
a. Turning to ON clockwise.
b. Turning to OFF anticlockwise.
02) Turn
off
the power after stopping
Figure 5
Notice: If the power is turned off during driving, the electromagnetic brake will
work and the scooter will suddenly stop
.
4.4
Speed adjusting switch
The speed adjusting switch is used to adjust the operating
speed when moving forward or backward, which can be
set within 0-6 Km/h. The slowest speed is set by turning
the button to the leftmost end. The fastest speed is set by
turning the button to the rightmost end (as shown in
Figure 6)
Notice: Do not set to the maximum speed when turning or backing up.
4.5
Direction control lever
Figure 6
Hold the rubber handle by both hands, and switch the direction control lever to
control forward and backward moving of the scooter (as shown in Figure 7 and
Figure 8).
a. Push the right control lever forward by right finger, and then the scooter moves
forward.
b. Push the left control lever forward by left finger, and then the scooter moves
backward. There is warning sound beeps when the scooter moves backward.
08
