- 10 -
2.2 Power-on Checking
1) Check before Power-on
Please check the followings before any operation:
1.
The charger’s location is easy for operation and repairing.
2.
Double confirm the charger is installed properly.
3.
AC input’s current leakage protection switch is reasonable.
4.
No other stuff or component left on the top of the charger.
2
）
Power-on Charger
1. Make sure all checking is done according to the above items.
2. Turn on the current leakage protection switch of AC input.
3. Power-on the charger and observe the LED indicator, which should be standby status.
State
Description
LED Status
Standby
Power-on, but no gun plug-in
Flashing green, 1S on 3S off
Ready to charge
Gun plug-in, but not start charging yet
Constantly green
In charging
Gun plug-in, and start charging
Breathing green, 1S on 1S off
Fault
Error happens
Flashing red, Constantly red
