SÓLAS
CONTEMPORARY FIRE
6
LOG SET INSTALLATION
9. Secure the central burner link using the [2] #10 sheet metal screws using a 5/16” nut driver
set aside
from Step 2.
Figure 9-A shows the burners before the burner link is installed; Figure 9-B shows the burners after the burner link
has been installed.
10. Install the 3-rock cluster on the 2 pins located to the right of the pilot assembly as shown below in Figure 10.
11. Install the log, resting along the back edge the 3-rock cluster, the left side of the log locates on a single pin
in the burner surface as shown in Figure 11 (below right).
Figure 9-A
Figure 10
Figure 9-B
Figure 11
> Start HERE if the SIXTY0 Slim-Line Built-In was originally ordered with a Log Set Burner
INTALLATION OF BIRCH LOG SET
