solasfires.com
3
CORNER KIT INSTALLATION
5. Attach the wall plate to the wall with the pass through
heat-shields in place, and fasten to the wall using the
9 lag bolts provided. See Figure 5.
Note: The four longer 2 1/2" lag bolts are to be used on
the diagonal mounting holes, and the five shorter lag
bolts are for use on the flat mounting holes.
6. Having secured the wall plate to the wall, fit the
diagonal mounting plate as shown in Figure 6. Please
ensure that all (4) mounting pins are fully engaged in
the (4) keyway slots.
7. Attach the mounting plate (that came with your fireplace)
to the corner wall mount unit and fasten in place with (4)
lock nuts and washers. See Figure 7.
8. Fit the custom 45˚ vent starter pipe and gasket supplied
with the Corner Kit to the SÓLAS ONE6 Fireplace
BEFORE mounting the fireplace to the wall mount.
Mount the unit on the wall mount and complete the
installation as described in the Installation & Operation’s
Manual supplied with the fireplace.
Once the installation is complete, fit the top and bottom
corner cover plates to the wall mounting unit using the
screws provided (that were removed in Step 1).
Figure 8
Figure 9
Figure 5
Use (4) Longer
Lag Bolts here
45° Vent Starter Pipe
Gasket
Use
Shorter
Lag Bolts
here
Figure 6
Figure 7
