14
14
C2
Roof area measurement
NOTE
A maximum of 10x10 modules should be installed
in a contiguous generator array. Here, a maximum
of only 10 transverse modules may be interconnec-
ted! Then, a new generator array must be started
in each direction!
1. Before beginning installation, the roof must be
measured according to planning documents and
the first point of installation must be determined.
It is advisable to mark the front baseline using the
Fig. C 2-1
chalk line, and then to measure the lateral
boundary line at right angles and to mark it
accordingly.
Summary of Contents for Sunfix Bisun
Page 23: ...23 23 D Notes...
