3.0:
Hardware Installation
Card Installation
The Orbit PCI Network Card is designed to be installed into a PCI slot on the computer motherboard. Follow the steps
below:
1. Before fitting the Orbit PCI Network Card, install the Orbit Support Pack for Windows
®
.
Refer to section 2.0 Software Installation.
2.
Turn off the power and remove the cover.
For instructions on removing the outer casing or access panels, refer to the user manual of the computer
being used. Be sure to follow any special instructions that may apply to installation of cards in the
computer being used.
3.
Look for an empty PCI slot and remove the slot’s blanking plate screw.
4.
Insert the Orbit PCI Network Card into one of the empty PCI slots of your computer. Press firmly as you
insert the card, making certain the edge connector is seated in the slot. Using previously removed screw
(refer to step 3), secure the Orbit Network card in place.
3.0: Hardware Installation
7
Part No. 502566 Issue 4
