12
Part No. 501107 Issue 13
4.3 NON-STANDARD CONNECTIONS
For non-standard transducer connections please contact your nearest Solartron Metrology office.
Note: To reverse the transducer output, ie. change for + for inward movement from null to - for
inwards movement from null, reverse connections for the green and white wires (AX/AC series)
or the black and red wires (MACH 1 series).
4.4 CONNECTING INSTRUMENTATION
Connections should be made with no power applied to the OD2. Once connections have been
made pass the wire through the grommet in the case. If required provide some cable retention to
prevent unwanted disconnection from the terminal block. Do not operate the OD2 unit without the
top cover securely fastened.
Fig. 4.2 - Connector 2
5
6
7
1
8
Con 2
Summary of Contents for Ametek OD2
Page 1: ...OD2 USER LEAFLET ...
