SOLARSOL recommends the following installation method for photovoltaic modules:
To do so, it’s necessary a M4 or #10 SS Screw, M4 SS Flat washer, M4 SS Cup washer, M4 SS Toothed washer, M4
SS Nut. Insert the flat washer into the screw and then insert the cup washer before you place it in the mounting
holes. Secure the screw to the aluminum frame using the toothed washer and a backing nut on the end of the
screw.
Normal level of load condition
High level of load condition
Sc
re
w
fa
sten
in
g t
o
ass
emb
ly
ho
le
s
Applies to most of the environmental conditions.
Use four mounting holes.
Applies to harsher environmental conditions such as
storms
Use eight mounting holes.
SOLARSOL DOES NOT INSTALL PHOTOVOLTAIC MODULES. However, you can contact us and we will gladly
communicate you with one of our installers. For further information, email us to: [email protected].
