SolarPath HIGHLIGHT-NPSL, User Manual

Page: 5 / 10

3
|
USER MANUAL
1.
2.
Let -(3) MC4 cables go through- (5) pole adapter
.
3. Insert- (4) MC4 cable adapter from top of pole and get it out from
the side hole of ( 7) steel pole
4.
Put the MC4 cable adapter into (8) light arm from A side to B side
5.
Fix (8) light arm to (7) steel pole by screws
6. Connect the MC4 connectors of ( 3 ) MC4 cables from solar panel
7.
Put (5) pole adapter ( panel and bracket are fixed on
.
pole adapter already) on (7) pole
8.
Insert the -(7) MC4 plugs into -(6) pole support.
9.
10.
Check every parts are connected and fixed properly.
Working Mode & ON and OFF Time
t in charge controller with light
goes less than 7 Volts from
the solar panel, the lights will turn ON. In the morning the DTTV ( Day Time Threshold Voltage) from
the panel reaches 7 Volts the lights will turn OFF.