™
•
Drill
•
Reciprocating Saw
•
Hammer
•
Caulk/Caulking Gun
•
Screwdriver
•
Flat Bar
•
Measuring Tape
•
Safety Goggles
•
Pencil
•
Stud Finder
•
Utility Knife
Tools Needed:
The Solaro Aire™ attic ventilation system is fully functional right
out of the box. THE FAN WILL BEGIN TO OPERATE AS SOON AS
IT IS EXPOSED TO THE SUN. PLEASE KEEP HANDS AND TOOLS
AWAY FROM THE BLADE DURING THE INSTALLATION.
Important Precautions:
• When determining the location of the solar panel, try to face the
panel towards the equator (South in the Northern Hemisphere or
North in the Southern Hemisphere).
• Avoid potential problems such as shading from large objects,
large trees, or other houses which may cause shading during cer-
tain times of the day.
• WARNING: Avoid all contact with the blades. Even a small bend
in the blades can cause severe vibration & premature motor failure.
• Do not cut any structural members in the house
• Always measure twice and cut once.
• Installation of the Solaro Aire™ should be centered on the roof.
• The center of the unit should be about 2ft ( 0.6 m) down from
roof ridge for maximum performance.
• Take precaution while working on the roof and with tools.
WARNING: Take caution during installation. Please
read through ENTIRE packet before performing
any work. Not following the instructions can void
the warranty and/or cause serious injury. For
professional help, please call 1-888-355-5SUN
Components & Parts List:
Helpful Hints:
Solaro Aire™ Embedded Series
Solaro Aire™ Tilt Series
Model Numbers:
SA-20WB-HPE
SA-20WB-LPE
SA-20WT-HPE
SA-20WT-LPE
SA-30WT-HPE
SA-30WT-LPE
SA-20WB-HP
SA-20WB-LP
SA-20WT-HP
SA-20WT-LP
SA-30WT-HP
SA-30WT-LP
A.
B.
OR
Fan Install Pack
•
F-030: (6) 1.5” Dual thread rubber washer screw
Summary of Contents for SA-20WB-HPE
Page 5: ......