Solaris MMA-208, User Manual

Page: 3 / 16

MMA-208
3
Dear customer!
We express to you deepest gratitude for the purchase of the welding machine SOLARIS.
The company reserves the modification of the specifications and the power of interpretation, if this manual
discrepancies with the physical, in kind prevail; Its contents will be subject to the packing list. This manual is
reference illustrations with welding machine. This welder is continuing to improve without prior notice.
SAFETY
Please read this manual carefully on the basis of the correct use before using.
This manual is only used for the welding machine installation, operation and maintenance.
There will be without prior notice If this model have content other changes.
Please give this manual or its copy to the welder operator.
The repair and maintenance person should be operated according to the instruction.
NOTICE:
Installation and maintenance should be done by professional electrician.
Electrical connection in the operation should be carried out after the distri-bution box to
disconnect the power switch.
Welding machine should be placed as far as possible, the tilt Angle should not be greater than
10 degrees.
WARNING! Electric shock may hurt or even deadly! Please remember close the power switch
before wiring distribution box.
Please do not touch any exposed conductive parts.
Welding may cause fire!
Inflammable should be kept with a distance of more than 10 meters.
Don't make splash falls on clothes or body.
Welding smoke is bad for your health.
Don't have breathe in smoke produced during welding.
Clean up the oil on the Workpiece.
Keep the welding field air circulation.
Welding station should have dust equipment.
Arc can damage eyes and skin.
Strong arc light can damage the eyes.
Produced by the arc ultraviolet rays can damage the skin and eyes, please wear labor
insurance clothing when welding.
Overheating partial burn skin.
Don't touch the welding parts of the overheating.
Don't touch with due to welding heat of welding cable or electrode holder.
Turn the fan may cause injury.
Do not put hand or fine content into the fan cover.
Open the chassis cover when welding.