15
Quasar Operating Manual
When turned on for the first time, the unit automatically
detects mains frequency. No manual setting is required.
• Quasar can produce more accurate “jitter free” flashes,
even at frequencies higher than 10Hz.
• Any fixture connected to any phase can be controlled in the
same way. When using more than one strobe, it is
advisable to assign different phases to the fixtures owing to
high power draw.
Recommended Controllers
• Solaris Quasar Controller
• High End Dataflash AF1000 Mini Controller (Switch the
JUMPER from DMX to DFLASH position on the PCB).
ADDITIONAL INFORMATION
Maintenance
Keep the fan and surrounding area free of dust and dirt. The
mirror can be cleaned without having to dismantle the unit.
Simply blow air through the grid. The mirror does require any
further cleaning. More thorough cleaning of the mirror and its
surroundings should ONLY be done by the manufacturer or
qualified and authorized repair personnel.
Changing the Flash Tube
The Quasar flash tube may only be changed by the
manufacturer or a qualified repair person authorized by the
Manufacturer.