Page
2
of
3
•
Fix wall mount to solar panel by using provided butterfly nut (Fig.4)
•
Fix the solar panel to the surface by using provided screws(Fig.5)
•
The solar panel is adjustable. Adjust the angle of solar panel to 45 degrees for best results. The installation
location must be located to capture the most possible sunshine during the day. IDEAL LOCATION OF THE
SOLAR PANEL WILL BE FACING SOUTH AT A 45 DEGREE ANGLE TO THE HORIZON.
INSTALLATION OF LIGHT
•
Drill 3 holes(dia. 8mm) on an appropriate
flat
surface using lamp flat mount base as template to determine
hole location.(Fig.6)
•
Fix wall mount to lamp by using provided nut (Fig.7)
•
Fix the lamp unit to the surface by using provided screws and anchors. (Fig.8). Adjust lamp initial aiming
direction before installation.
•
After installation, connect Spot light wire with Solar panel wire (optional wire kit for longer use) and switch
the unit on the back of the solar panel. The light will automatically be operational when the panel detects
that it’s dark enough.
III Solar Flag Pole Light (OPTIONAL USE)
•
Take off the connection part of LED lamp(Fig.9)
•
Fix lamp to pole mount base by using screws provided.
•
Mount Solar Panel to pole mount base using provided butterfly nut (Fig.10).Adjust lamp initial aiming
direction before fixing it.
•
Fix the pole light unit to flag pole by using stainless steel clamps. There are different sizes of clamps suitable
for different size of flag pole. (Fig.11)
•
After installation, connect Spot light wire with Solar panel wire and switch the unit on the solar panel. The
light will automatically be operational when the panel detects that it’s dark enough.
Fig.4
Fig.7
Fig.8
Fig.3
Drill holes following to
this unit
Fig.5
Fig.6
Drill holes following to
this unit
