SOLARFOCUS PelletElegance 10, Manual

Page: 2 / 40

1 About this manual
1 About this manual 2
2 Safety information 3
3 Technical requirements 3
3.1 Warranty, guarantee, liability 3
3.1.1 Technical requirements for warranty and gua-
rantee claims 3
3.1.2 Conditions for claims 4
3.1.3 Claims rendered void 5
3.1.4 Limitation of liability 5
3.2 Standards, guidelines, regulations 5
3.3 Installation room 6
3.4 Chimney, flue gas pipe 6
3.5 Supply air in the installation room 7
3.6 Room sealed operation (RS) 8
3.7 Heating system fill-up water 8
3.7.1 Avoiding scale buildup 8
3.7.2 Avoiding water-side corrosion 9
3.8 Information about the hydraulic connection 9
4 Product information 10
4.1 Scope of delivery 10
4.2 Accessories 10
4.3 Functional components 11
4.4 Dimensions and connections 12
4.4.1 Flue gas pipe facing upwards - dimensions 12
4.5 Technical specifications 14
5 Installation 16
5.1 Prepare and position the boiler 16
5.1.1 Removing the ash container 16
5.1.2 Removing the cover 16
5.1.3 Removing the boiler door 16
5.1.4 Removing the disposable pallet 16
5.1.5 Placement of the boiler 16
5.1.6 Removing the top cover 17
5.1.7 Removing the right-hand side panel 17
5.1.8 Setting the adjustable feet 17
5.1.9 Fitting the ball valve for return 1 and flow 2 17
5.2 Establishing the room-sealed connection
(optional) 17
5.3 Establishing the chimney connection 20
5.3.1 pellet elegance Flue gas pipes: Overview 20
5.3.2 Flue gas pipe facing upwards (optional) 21
5.3.3 Flue gas pipe: Hole for emission measurement 21
5.4 Connecting the pellet hose 22
5.4.1 Electrically earthing the pellet hose 22
6 Hydraulic equipment 23
6.1 Information about installing the hydraulic
extensions 23
6.2 Position of the servomotor on the mixer 24
6.3 Basic equipment: Buffer charging 25
6.4 Extension pack for heating circuit 1 25
6.5 Extension pack for heating circuit 2 27
6.6 Extension pack: DHW tank charging (or
unmixed heating circuit) 28
6.7 Extension pack: DHW tank charging
(without buffer tank) 29
6.8 Extension: Only heating circuit(s), without
DHW tank, without buffer tank 30
7 Hydraulic connection 31
7.1 Boiler connections 31
7.2 Filling the heating system 31
7.3 Venting the heating system 31
7.4 Connecting the safety valve's blow-off line 32
7.5 Installing thermal overload protection
32
7.6 Removing the shut-off valve on the buffer
return 33
8 Electrical connection 33
8.1 Power supply for the heating system 33
8.2 Connections on the power element 33
8.2.1 Connecting the heating circuit pump (X9, X10) 34
8.2.2 Pellet conveyor system (X14) 35
8.2.3 External boiler request (X28) 35
8.2.4 Operating fault (X29) 35
8.2.5 External request (X51) 35
8.2.6 Installing the emergency OFF switch 35
8.3 Sensor resistance table 36
8.4 Electrical fusing 36
8.5 Connecting the control to the internet 36
9 Initial start-up 37
10 Shut-down 37
11 Annex 38
11.1 Power element (figure) 38
11.2 Electrical components - overview 39
1 About this manual
Dear heating engineer
To ensure reliable and efficient operation of the hea-
ting system, the following points are extremely import-
ant:
–
Correct installation
– Training of customers in initial commissioning
– Complying with the specifications and instructions
in this manual
–
Regular maintenance by the system operator
–
Regular maintenance by qualified personnel
2 Installation manual pelletelegance
Content