SolarEdge Wi-Fi Kit Quick Installation Guide
MAN-01-00166-1.1
6
Wi-Fi Configuration
1
Verify that the inverter ON/OFF switch is OFF.
2
Turn ON the AC to the inverter.
WARNING!
ELECTRICAL SHOCK HAZARD. Do not touch uninsulated
wires when the inverter cover is removed.
3
Press the
Enter
button for at least 5 seconds, and enter the
password (
12312312
).
4
Select
Communication
Î
Server
Î
Wi-Fi.
5
Select
Communication
Î
Wi-Fi Conf
6
Do one of the following:
If your router supports WPS mode, you can automatically
connect without entering a password (use either the LCD light
button or the internal user buttons):
a.
Select
Wi-Fi Conf
Î
WPS mode
.
b.
Push the WPS button on your router and hold until a LED
lights up (refer to your router manual).
c.
Check that the message
Connected
is displayed on the
inverter LCD screen.
Otherwise, to connect to a specific network from a list (use the
internal user buttons):
a.
Select
Wi-Fi Conf
Î
Scan Networks
.
b.
Select the required network from the list of networks.
c.
If required, enter the security key (up to 20 characters) and
long-press the Enter button.
The system starts the connection process. Connection time
may take up to 30sec, after which the message
Connected
is displayed on the LCD for 5 seconds.
7
Press
Esc
to exit the Setup mode.