Figure 7: Variable clamping range
For exact dimensions of a given module series, please see table "Modules Dimensions" below. Use in conjunction with
Figure 8
to determine permitted clamping
locations for a given module series for clamping with clamps.
Table 1: Modules Dimensions
Module
Series Dimension (mm)
A (mm) B (mm) C (mm)
PVxxx-60MMJ
1650*992*40
1650
200
210
7.
Chapter 2
mounting method clamp positions are important – the clamp centerlines refer to mark “D” which must be between 50mm and 200mm from the
end of the module.
8.
Figure 2
mounting method, the modules may be mounted using clamps designed for solar modules refer to
Figure 8
the modules must be supported along
the length of the long edge and should overlap the array rail by 10mm – 14mm. The module may be clamped only in the permitted clamping area as on the
long edge of the frame. For exact locations on the frame refer to in
Figure 7
conjunction with table "Modules Dimensions" above
Figure 8: Clamps designed for solar modules
Smart Modules Installation GuideMAN-01-00520-1.0
9
Chapter 2: Mechanical Installation
