Configuration
Smart Energy devices are configured using the following inverter types:
Inverters with an LCD - from firmware version 3.25xx. Refer to
Inverters with an LCD on page 19.
Inverters with SetApp configuration - from firmware version 4.7.xx. Refer to
Configuration with Inverters with an LCD on page 19.
For detailed information about various use cases, refer to
https://www.solaredge.com/sites/default/files/home_energy_
management_immersion_heater_controller_use_cases_app_note.pdf
NOTE
Verify that the inverter has a ZigBee Plug-in installed and is connected to the
monitoring platform (refer to the
Inverter Installation Guide for details on
setting up communication).
Configuration with Inverters with an LCD
Required inverter Firmware CPU version : v3.25xx and later.
To associate the device with the inverter using the inverter LCD user buttons:
1. Enter the inverter Setup mode as described in the
Inverter Installation Guide.
2. Select
Communication
è
ZigBee Conf.
.
3. Select:
Device Type
è
HA
(Home Automation)
Protocol
è
HAM
(Home Automation)
When HA Device Type is selected, a
Device Manager
menu item will appear in the
main configuration menu:
C o u n t r y < I t a l y >
L a n g u a g e < E n g >
C o m m u n i c a t i o n
P o w e r C o n t r o l
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
4. From the main menu select
Device Manager
. The Device Manager screen is
displayed:
Configuration
19
Smart Energy Hot Water Installation Guide MAN-01-00570-1.4
Summary of Contents for Smart Energy Hot Water
Page 1: ...Installation Guide Smart Energy Hot Water Version 1 4...
Page 37: ......
