EV Charger and EV Charger Cable Specifications
NOTE
The EV Charger and EV Charger cable are ordered separately.
EV CHARGER
Charging Mode
AC Mode 3
Connection to the SolarEdge monitoring
platform is required for first EV charging
Minimum charge rate
(1)
1.5
kW
Rated AC Power Output
7400
W
Nominal AC Output Voltage
230
Vac
Nominal AC Frequency
50 / 60
Hz
Maximum Continuous Output
Current @230V
32
Aac
Residual Current Detector (AC)
30
mA rms
Residual Current Detector (DC)
6
mAdc
ADDITIONAL FEATURES
EV Charger Status LEDs, Fault
Indicator
Yes
EV Charger Ground Connection
Monitoring
Yes, continuous
EV Charger Configuration
Via the monitoring app; Ethernet, Wi-Fi or
ZigBee connection is required
(2)
EV Charger Unplugging
Detection
Yes, current termination according to IEC
62196
STANDARD COMPLIANCE
Safety
IEC 61851, IEC 62752:2016
EV Charger
IEC 62196
INSTALLATION SPECIFICATIONS
EV Charger Connector
IEC 62196 Type 1 /Type 2
EV Charger Cable Length
(3)
7.6 (4.5 option)
m
(1)
Minimum charge rate is in compliance with IEC61851-1 and J1772™ FEB2016 standards.
(2)
Cellular connection may be used; requires a SIM card with a 50MB data plan that should be purchased
from a cellular provider; a SolarEdge data plan supports activation only
(3)
EV Charger cable ordered separately.
Technical Specifications - EV Charging Single Phase Inverter (Europe & APAC)
85
EV Charging Single Phase Inverter Guide MAN-01-00583-1.5
Summary of Contents for SE3680H
Page 90: ......
