11 Progress Circuit Prestons NSW 2170 – Ph. 1300 852 622 – www.solarbright.com.au
Connect the
cable provided
to the back of
the solar panel
Secure the
panels to the
bracket and
insert the cable
inside the roof
space safely.
Ceiling work:
1-
Using the template provided (plastic strip with holes at either end), centre one hole in the middle of
the ceiling location where the ceiling diffuser is to be installed and hold with a screwdriver. Using a
pencil or marker, trace a circle in the outer hole of the template on the ceiling and then cut out the
circle in the ceiling with a gyprock/reciprocating saw.
2-
Connect the cable to the LED light. (one end of cable is connected to solar panel and the other to
the LED Light)
3-
Insert the ceiling ring into the hole and secure it to the ceiling using the screws and angle anchors.
4-
Ensure the area surrounding and top of the LED light inside the roof is clear, insulation and other
objects must be secured away from the LED light.
5-
Align the lugs on the diffuser with ceiling ring and push up into ceiling ring groove, twist the diffuser
clockwise to lock into place.
6-
Remote controls are supplied to turn on/off the LED for the day & night models only.
7-
Attach battery pack to roof frame as shown (for day & night models only)
LED for day operation only
Battery pack for LED day & night operation
