Choose Your Destiny
BRUTUSBOT
Step 13 - Installing your controller: The acrylic top plate has a
footprint for the classic Arduino hole pattern which matches the
Arduino UNO, Freeduino, PICAXE-28 project board or EZ-B. You can
attach the board via the extra [4] #4-40 x 3/8 bolts and nylon
spacers.
If you wish to use something else, use double sided sticky tape or
drill some holes. Acrylic
is fragile
and may crack when drilled with
regular high-speed bits, so try to use
plastic-drilling
drills at slow
speed (on a wood back-support), or a diamond-bit. We’ve even
resorted to using hot-glue for some projects (see “Herbert” below).
We’ve also included some #2-56 x 5/8” screws that can be used in
conjunction with the acrylic spacers to mount the servo up a little
higher when the twin motor gear box is in “C” configuration.
Arduino Uno
10
EZ-B v3
SB Freeduino
PICAXE-28 Project Board
“Herbert” -
Herbie modified BrutusBot
