© Solarbayer GmbH (213859)
5
PRODUCT INFORMATION
Satellite collector NANOSOL 135
1.3 Safety devices
Pressure relief and non return valve
The protec
ti
on from overpressure or overhea
ti
ng
foresees the expulsion of a given mass of water in
case the pressure inside the tank exceeds 6 bar in
order to bring the pressure back to op
ti
mum values.
At the same
ti
me a given mass of cold water will get
into the tank lowering the temperature of water.
Warning labels
Some labels stuck on the appliance highlight some
important warnings.
Each dangerous point is marked with a suitable label.
Keep the labels clean and legible; replace those that
are missing or damaged.
ATTENTION:
Danger of serious burns!
If the
appliance is located in a place easily
accessible to people, do not approach it during
the day because there could be a high tempera
ture. Keep children away from the water heater,
fencing the appliance if necessary.
ATTENTION:
If the appliance is installed in Italy,
the pressure relief valve supplied
with the appliance must be replaced with a safety
group in accordance with the UNI rule EN
1487:2002 (as required by The Memorandum N°
9571 dated 26/03/03 issued by Ministry of Pro
duc
ti
ve Assets
G.U. N° 87 of 14/04/03). In case
of non
installa
ti
on of a safety group in compli
ance with the rule EN 1487, the manufacturer will
be exempted from any warranty claim on the
tank.
ATTENTION:
If the discharged hot water due to
overpressure may damage nearby
objects, we suggest to foresee a suitable draining
system in order to avoid any problem. The water
inside the tank can reach very high temperatures
(over 60 °C): for this reason in order to avoid any
risk of burning it is necessary to install a water
mixer expecially when we foresee to use the hot
water taking it directly from the panel.