ST-BT110 Solar GPS Receiver User Manual
-9-
3) If not found, please create a Bluetooth serial port by yourself. The configuration should be like
this:
4) If there is already one, please check the content. Some Bluetooth device will enable the secure
connection. Please refer to the configuration as above to uncheck it.
5) Power on your Solar Bluetooth GPS Receiver
. If the battery is ready, you should see 2 LED
light up: the blue LED blink 3 times/sec means Bluetooth is activated and waiting for connection.
Another static red LED shows the GPS module is started and is inquiring position information.
6) Open your Bluetooth places; you should see nothing while using firstly.
7) Click the [View devices in range] and you should find a [Bluetooth GPS] show as below:
Please uncheck the
secure connection
Name it as
you wish
