Datasheet
List of accessories
Installation Procedure
Components List
1. Aluminum Arm
2. LED and Battery Housing
3. Lamp Cover
4. Solar Panel
Other Parts and Tools Included:
The following fixtures and fittings are included with the moonlight.
1. 4 x 304 expansion screw, washer and nut
2. 2 x 304 M6 hexagon bolt (long) and locknut
3. 3 x 304 M6 bolts (short)
4. 1 x M5 allen key wrench
5. 1 x M10 open-ended wrench
6. 1 x pole mounting back board
Step 1
Insert the LED and battery housing into the aluminum arm and secure with bolts provided.
Step 2
Attach solar panel to aluminum arm with bolts provided.
Step 3
Screw on lamp cover.
Step 4
Attach solar panel cable to socket in LED and battery housing.
Step 5
Use bolts provided to secure assembled moon light to wall or pole.
Adjust solar panel to face the midday sun and fully tighten all bolts.
N.B. Choose instalation site carefully to ensure the solar panel is not shaded by surrounding
obstructions at any point in the day.
The panel requires six hours of unobstructed sunlight per day to fully charge the battery.
LED Power
LED Lumens
Battery Capacity
12W
4W
700-900lm
10AH
25W
8W
12w
40W
1050-1440lm
20AH
30AH
Charging time
Static power consumption
Operating temperature
Nominal service life
Light Source
LED Supplier
Color temperature
CRI ( color rendering index )
Battery discharge time
Drive current
6 hours
0.064W
(microwave induction)
-20°C ~ 60°C
≥ 50,000h
6 x LED
PREAD LED
3000 ~ 6500K
Ra≥70
3 days
(little time difference upon
6 different modes)
300 mA / LED
Installation options
Suggested mounting
separation distance
Suggested mounting height
Light delay
Movement sensor distance
Bracket material
Surface treatments
Detection angle
Light-controlled voltage
wall mount, pole mount,
lamp-post, telegraph pole
8 ~ 10m
2.5 ~ 4m
20S
5 ~ 8m
High quality aluminium alloy
sections, high-pressure
casting aluminum
Hot dip galvanized
140*360
1V
Battery material
Lithium iron phosphate
Solar Module
1800-2100lm
ON
Night Time Mode (L)
Light will automatically turn on at night and operate at 30% brightness
until morning. Movement sensor will trigger 100% brightness for 20
seconds.
Movement Sensor Mode (M)
From nightfall until morning, light will automatically turn on to 100%
brightness when it senses movement nearby. It will turn off twenty
seconds after movement stops.
Timer Mode (T)
Light will automatically turn on at night and operate at 100% brightness
for four hours and then turn off.
Combination Mode (U)
Light will automatically turn on at night and operate at 100% brightness for four hours and then turn
off. The movement sensor will continue to trigger 100% brightness for 20 seconds until morning.
Intelligent Lighting
