Manufactured by:
Solar Vision inc.
www.solar-vision.ca
T. 1-819-729-0450
STEP 3 Battery padding and battery
Place the supplied battery padding and the battery into the mounting base as
shown in the figure.
STEP 5 Complete the installation
Place the bollard main body assembly over the mounting base, as shown in
the figure, and use the supplied hardware to secure into place.
Important:
Make sure not to pinch the battery cable or connector. Make sure
to properly clear the battery terminal boots protectors when sliding the main
body part over the base.
Note:
The ventillation vents should be on the opposite side to the path.
STEP 4 Battery connection
Having the bollard main body assembly in close distance to the mounting
base/battery, make the battery connection using the quick-connect cables.
