manualshive.com logo in svg

Solar Stik 21-0202316, Operator And Maintenance Manual, Page: 18 / 29

Share
Download
Solar Stik 21-0202316 Operator And Maintenance Manual Download Page 18

24VDC Li Expander Pak 1300 Operator Manual

June 2020 

|

 Solar Stik® Inc.

18 

|

  

Expander Pak–specific ports on Solar Stik power management components are labeled. Individual 
Expander Paks or a bank of Expander Paks can be connected to these ports. Expander Pak–specific 
ports are metered and can be used to measure the amount of energy flowing into and out of the bank 
of Expander Paks.

PRO-Verter

Power Hub

Figure 8. Connecting Expander Paks to Solar Stik power management 

Connect Expander Paks to Power Management

Alternative Methods of Recharging the Expander Pak

Alternative methods of recharging should be performed using only regulated charging sources 
appropriate for 24 VDC LiFePO

4

 batteries such as the 24VDC Li Battery Maintainer shown in Figure 9.

Figure 9. 24VDC Li Battery Maintainer with Inter-Connect Plug

Recharging Voltage

Do not connect an external charging source that exceeds 29 8 volts to the post terminals 

 This 

may damage the battery and is not covered under any warranty.

Correct Polarity

Always connect to DC terminals using correct polarity

. Failure to connect using correct polarity 

will trip the master breaker or trigger protection circuits to engage.

Summary of Contents for 21-0202316






























Reviews:

No comments