Solar MD SS4143-11, Installation Manual

Page: 19 / 55

Button indication
**Access to all features in future development
The Multipurpose button advanced indication functionality, allows the user to choose
between 5 different states. Mixed combinations are also allowed when a combination of
multiple batteries with BMS-EX are
used. The User can change the prefered stage by logging into their mypower24 Energy
Portal and going to the Battery Settings.
Illumination off
**For future development
When this state has been selected, the button serves as an on/off switch without illumination
(fixed colour).
Color based on capacity
When this state has been selected, the button shows static illumination in a color based on
the state of charge. From RED at 0% SoC (State of Charge) to GREEN at 100% state of
charge.
Color based on capacity with current direction based on
shading.
**For future development
When this state has been selected, the button shows flashing illumination in a color based
on the state of charge and flashing code based on the electrical current direction (charge /
discharge). From RED at 0% SoC (State of Charge) to GREEN at 100% state of charge.
The flashing code for charge goes through illumination interruption for 1 interval and slow
illumination into the color based on the SoC for 5 intervals. The flashing code for discharge
represents the opposite from charge - study color for 1 interval and slow loss of color
following illumination interruption. Solar MD users refer to both as charging / discharging
waves.
18