Solar MD Proprietary Limited
Company Registration: 2014/169938/07
T: 021 555 2181
E:
W:
Connecting Inverters/chargers/UPS to the battery unit while is ON
can cause big sparks due to capacitors inside the connected device.
This can be harmful for human.
Connecting main battery terminal must be with right size cable based
on the rated current of the battery the charger/inverter in case it is
lower. Use only 5mm hole diameter for the cable lugs.
Figure 8 connection terminal
Step 2. Connect negative cable to battery negative terminal and positive to
battery positive shown is figure8
Step 3. Install back safety jumper figure7
Step 4. Connect On/Off button to the board connector see figure7
