TERMINAL
BOX
FIXING BOLTS
Fig. E
7
FIXING BOLTS
SCREW TO LOCK
DOWNWARD
POSITION
Fig. F
Fig. G
TYPICAL HEATER MOUNTING ARRANGEMENT
FIX IN DESIRED
POSITION
SCREW TO LOCK
POSITION
1
. Securely fasten the L-shaped wall brackets to
the mounting surface as shown in Fig. B (for
wall
mounting)
or
Fig.
C
(for
overhead
mounting). Refer to the mounted bracket hole
centres detail in Fig. D. See Table 1 for
recommended positioning of the heater.
NOTE: WALL FIXINGS ARE NOT SUPPLIED.
2
. The heater should be mounted with the terminal
box at the bottom of the heater when wall mounted
(see Fig. E).
3
. Position the heater between the two brackets and
fix through the body brackets. Loosely fit the fixing
bolts on the brackets at the rear of the heater
as
shown in Figs. E & F.
4
. Fix in the desired position and tighten locking
screws. Then fully tighten heater bolts.
5
. Ensure the supply cable is not resting on the
heater.
