Solahart ATMOS AIR 270, Operation & Installation Manual

Page: 5 / 40

1
1.Safety Precautions
To prevent personal injury and avoid causing damage to the unit, please take the time to
read the information documented in this manual.
Icon Meaning
A wrong operation may lead to serious injury or death.
A wrong operation may lead to injury or loss of material.
WARNING
INSTALLATION WARNING
Icon Meaning
Compulsory - The listed action must be implemented.
Attention to what is indicated.
Prohibited (Next to this icon)
The heat pump must be installed by qualified persons. Improper
installation could result in electrical shock /water leakage or fire.
Please ensure that the unit and power connections have a good
earth. Failure to do this may cause an electrical shock.
Professional installer
required
Earthing is required
ATTENTION
Check drainage fittings
Before installation, make sure there are no leakages on the
drainage fittings.
1.Safety Precautions
2
Installation place
Fixing the unit
Circuit breaker required
The unit CANNOT be installed near flammable gas.
Ensure that the base you are fixing to is level and strong enough.
This unit requires a circuit breaker. failure to do so could result in an
electrical shock or fire.
OPERATION WARNING
Prohibited
Shut off the power
Do not put fingers or any other objects into the fans. Children should be
kept clear of this appliance.
In the event of a unit malfunction please shut the power off and contact your
service engineer.
MOVE AND REPAIR
Important
If the heat pump needs to be relocated or installed again, only use an authorised
dealer or qualified
personnel
.
It is prohibited for the end user to repair the unit themselves, unless qualified.
F
ail to do so
may lead to serious injury or
/
and damage to the unit.
Should the heat pump need to be repaired, only use an authorised dealer or
qualified person
nel
.
Prohibited
Important
OPERATION ATTENTION
Shut off the power
Turn the power off before cleaning the unit.
USAGE WARNING
Usage warning
Danger - High temperature.
Set
ting
a too high temperature of outlet water can cause scalding!
If the product need repair, please do not attempt to repair
it
by yourself.
Inform the local vendors and send the barcode on the casing of the unit
order to reach professional repair.