HEAT PUMP AND TANK ASSEMBLY
36
27.
Water Connections:
Connect the cold water supply and the hot water pipe work to the water heater.
Connect the temperature pressure relief valve and its drain line.
Refer to
“Connections – Plumbing”
on page 37.
28.
Water Supply:
Turn on the cold water supply and fill the water heater.
Check the pipe work and the connection points for the flexible braided hoses for leaks
Refer to
“To Fill And Turn On The Water Heater”
on page 41, however the electrical supply should
not be turned on at this stage.
29.
Heat Pump Module Cover:
Replace the heat pump module cover and re-fit the two screws.
Step 29
replace heat pump module front cover
30.
Commissioning:
Refer to
“Commissioning”
on page 41.
