DISPLAY PANEL
18
CLOCK
The water heater has a clock function. It is necessary to set the clock to use the timer setting functions of the
water heater. The
clock can be set whether the heat pump is “On” or “Off” at the Display Panel.
The setting of the clock includes year, month, day, hour and minutes. Once the clock is set, the time in hours
and minutes is displayed in the Time / Date Display Area.
The clock is a 24 hour clock, i.e. if the time is 3:30PM, it will show as 15:30 on the clock.
If there is a period of inactivity of 10 seconds during the setting of the clock, the Display Panel exits the clock
programming and the display reverts to the time which has been set to that point.
•
To set the clock
◼
Press the “Clock” key.
The hour digits in the Time / Date Display Area commence to flash.
A colon separates the hour digits (on left) and minute digits (on right) on the display.
◼
Press the "Up" key or "Down" key to select the hour digits.
◼
Press the “Clock” key to save the hour digits.
The minute digits commence to flash.
◼
Press the "Up" key or "Down" key to select the minute digits.
◼
Press the “Clock” key to save the minute digits.
The month digits commence to flash.
(the months are represented numerically, i.e. 01 to 12)
A single dot separates the month digits (on left) and day digits (on right) on the display.
◼
Press the "Up" key or "Down" key to select the month digits.
◼
Press the “Clock” key to save the month digits.
The day digits commence to flash.
(The day is represented by the date within the month, i.e. 01 to 31)
◼
Press the "Up" key or "Down" key to select the day digits.
◼
Press the “Clock” key to save the day digits.
The month and day digits are replaced by four digits representing the year and commencing with 20.
The last two digits of the year commence to flash.
There is no colon or dot separating the first two digits and last two digits of the year on the display.
◼
Press the "Up" key or "Down" key to select the year digits.
◼
Press the “Clock” key to save the year digits.
The time is displayed in the Time / Date Display Area.
The clock is now set.
