Page 1: ...m each lamp connector 4 Remove lamp holders using a 1 4 size nut driver Figure A 5 Remove each lamp by grasping the end cap and extract carefully 6 Using a soft cloth moistened with rubbing alcohol wipe down each lamp If there is a large build up of dust particles you may wish to use a can of air first Always handle lamps by end caps 7 Slide one lamp back into lamp opening Reinstall lamp holder 8 ...
Page 2: ... the air duct using the four self tapping sheet metal screws provided 6 Remove the germicidal lamp holder using a 1 4 size nut driver Figure A 7 Slide the germicidal lamp into lamp opening 8 Reinstall the lamp holder and plug lamp into connector 10 Replace cover and secure using the four machine screws Figure A Oxidation Lamp holder Germicidal Lamp holder Oxidation odor control WIRING This unit mu...
Page 3: ......
Page 4: ...ttern for the unit and mark centers for mounting screws Unit must be oriented so long dimension is parallel to the direction of the air flow Please note the airflow direction marked on the unit 3 Cut opening for the unit 4 Install unit into air duct so that airflow matches direction indicated on side of unit using the four self tapping sheet metal screws provided ...
