background image

SDU DC Series Instruction Manual • 5

• Follow all warnings and instructions marked on the UPS. Do not attempt to 

service the UPS, as it has no user-serviceable parts inside. Refer all repairs to 

a qualified technician.

• Do not dispose of batteries in a fire; they may explode.
• Do not open or damage the batteries. Released electrolyte is harmful to the skin 

and eyes and may be toxic.

If your UPS demonstrates any of the following conditions, turn OFF the UPS, 
disconnect the dc supply and contact your SolaHD representative or SolaHD 
Technical Support at 1-800-377-4384.

• Liquid has been spilled on the UPS.
• The UPS does not operate in accordance with the instruction manual.

1.2 Conditions of Use

Your UPS provides conditioned power to connected equipment. The maximum 

load must not exceed that shown on UPS rating label. If uncertain, contact your 
SolaHD representative or SolaHD Technical Support at 1-800-377-4384.

2.0 Warnings Defined

Danger:

 Indicates an imminently hazardous situation 

that, if not avoided, will result in death or serious injury. 

This signal word is limited to the most extreme situations.

Warning:

 Indicates a potentially hazardous situation that, 

if not avoided, could result in death or serious injury.

Caution:

 Indicates a potentially hazardous situation that, 

if not avoided, may result in minor or moderate injury. It 

may also be used to alert against unsafe practices.

Summary of Contents for SDU 10-24





























Reviews: