S4K2UC SEriES USEr MAnUAl |
7
This UPS is not for use in a computer room as defined in the standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
The S4K2U3000-C was investigated under 30 A branch circuit in accordance with the National Electrical Code, ANSI/
NFPA 70, to reduce the risk of fire; connect only a circuit provided with 30 A maximum branch overcurrent protection.
Battery Safety Notes
!
CAUTION
Do not dispose of batteries in a fire; they may explode. Dispose of used batteries according to local regulations.
Do not open or mutilate the batteries. Released electrolyte is toxic and harmful to skin and eyes. If electrolyte comes into
contact with the skin, wash the affected area immediately and get medical attention.
!
CAUTION
A battery can present a risk of electrical shock and high short circuit current. The following precautions should be observed
when working with batteries:
♦
Remove watches, rings and other metal objects
♦
Use tools with insulated handles
♦
Wear rubber gloves and boots
♦
Wear protective eye ware (safety glasses)
♦
Do not lay tools or metal parts on top of batteries
♦
Disconnect charging source prior to connecting or disconnecting battery terminals
♦
Determine if the battery is inadvertently grounded. If it is inadvertently grounded, remove the source of the ground.
Contact with any part of a grounded battery can result in electrical shock. The likelihood of such shock will be reduced
if grounds are removed during installation and maintenance (applicable to a UPS and a remote battery supply not
having a grounded supply circuit).
Electromagnetic Compatibility
The S4K2UC complies with the limits for a CLASS A DIGITAL DEVICE, PURSUANT TO Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device
must accept any interference received, including interference that may cause undesired operation. Operating this device in a
residential area is likely to cause harmful interference that users must correct at their own expense.
The S4K2UC Series complies with the requirements of EMC Directive 2004/108/EC and the published technical standards.
Continued compliance requires installation in accordance with these instructions and use of accessories approved by SolaHD.
Information for the Protection of the Environment
UPS Servicing:
The UPS makes use of components dangerous for the environment (electronic cards, electronic components).
The components removed must be taken to specialized collection and disposal centers.
