6
| important Safety Precautions
iMPOrTAnT SAFETY PrECAUTiOnS
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions. read all safety and operating instructions before operating the
Uninterruptible Power System (UPS). Adhere to all warnings on the unit and in this manual. Follow all operating and user
instructions. This equipment can be operated by individuals without previous training.
This product is designed for commercial/industrial use only. it is not intended for use with life support or other designated
“critical” devices. Maximum load must not exceed that shown on the UPS rating label. The UPS is designed for data
processing equipment. if uncertain, consult your dealer or local SolaHD representative.
This UPS is designed for use on a properly grounded (earthed) 100/200, 110/220, 115/230, 120/208, 120/240, or 127/220 V ac;
50 or 60 Hz supply. The factory default setting is 120/208 V ac, 60 Hz. installation instructions and warning notices are in
this manual.
The S4KC is designed for use with a four-wire input (L1, L2, n, G).
!
wARNINg
Although the S4KC has been designed and manufactured to ensure personal safety, improper use can result in electrical
shock or fire. To ensure safety, observe the following precautions:
•
Turn off and unplug the UPS before cleaning it.
•
Clean the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners.
•
Never block or insert any objects into the ventilation holes or other openings of the UPS.
•
Do not place the UPS power cord where it might be damaged.
Operate the UPS in an indoor environment only, in an ambient temperature range of 0°C to +40°C (+32°F to +104°F).
install the UPS in a clean environment, free from moisture, flammable liquids, gases, and corrosive substances.
The S4K4U6000C contains no user-serviceable parts except the internal battery pack. The S4K6U10KC contains no user-
serviceable parts except the internal battery pack and the power module. The UPS On/Off buttons do not electrically
isolate internal parts. Under no circumstances should you attempt to gain access internally due to the risk of electric
shock or burn.
Do not continue to use the UPS if the front panel indications are not in accordance with these operating instructions or
the UPS performance alters in use. refer all faults to your SolaHD representative.
DO nOT COnnECT equipment that could overload the UPS or demand dc current from the UPS, for example: electric
drills, vacuum cleaners, laser printers, hair dryers, or any appliance using half-wave rectification.
Storing magnetic media on top of the UPS may result in data loss or corruption.
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the required
precautions. Proper disposal of batteries is required. refer to your local laws and regulations for disposal requirements.
