Your
SOL
Harnesses
can be used to towed flight, since it is connected to
the towed flight system
(Tow release)
.
Tow release must be connected to the same carabiners that join the
harness to the paraglider. It is activated through a rubber band
strategically located which when pulled releases the equipment to fly.
FINAL ADJUSTMENTS
Before start the flight in your
SOL
Harness
make a detailed check of the
following aspects:
1º)
If al pockets are correctly closed;
2º)
If the reserve parachute’s fist is in the right position;
3º)
If every hook, legs and chest, is connected;
4º)
If the distance between the carabiners is according to
the paraglider homologation.
CHARACTERISTICS AND ACESSORIES
Foot Stirrup:
The
SOL CX Harness
possesses foot support, while
CX PRO
does not follow
this therefore its support this in the proper carren. The geometry of these
seletes was chosen in order to guarantee stability in the flight.
Front Container:
The
SOL CX Harness
allows a special recipient connection
(container)
,
where the pilot can put his/hers electronic instruments during the flight.
Attention:
This recipient can not be used if the emergency parachute is set in a frontal
position. In this case is possible to get an appropriate container to the reserve
parachutes and instruments.
Pockets:
The
SOL
Harnesses
have a big pocket at the back and a side pocket with a
zipper. These pockets were projected in such way that prevents an
accidental fall of the materials during the flight
.
MAINTENANCE, REPAIRS AND CLEANING
