11
Attention
Image 6 and 10: Pull the bridles firmly to stop an involuntary opening, this avoids a
dangerous friction in the event of a reserve opening.
The
S
S
O
O
L
L
-Harness features a reserve parachute installation system with easy access at
the moment of grab and throw, by possessing an activator which has a shorter
connection. Some layers of fabric covers the entrance recipients destined to the
reserve (Figure 18), protecting the parachute from dust and humidity.
In case the pilot lands on water and gets the reserve wet, the reserve should be
removed from the harness, be dried and re-packed before it is placed back into the
recipient (see the reserve manual).
Attention
Before every flight, inspect the activation handle and its pins, to make sure they
are at the correct setting position.
After the installation you should make a test.
The container's size takes to account the reserve size which would be normal for
the pilot's weight x harness size. There might be the case when large reserves may
not fit adequately in the smaller size harness.
Never throw the reserve in flight-direction.
Pay special attention to the fact in which direction you must pull
your reserve in order to throw it out.
