36
37
Traditional-Method
Step 1: Bundle up your glider in form of a
cabbage. This way you’re avoiding that
the glider drags over the ground during
folding.
Step 2: Begin with the center of the trailing
edge. Put one profile over the other. Each
side separate.
Step 3: Now do it in the same way
with the leading edge profiles. Put the
reinforcements of top and bottom in the
right way, don’t close the cell openings
and push out the fabric.
Step 4: Fold the wing like an accordion from both sides and put one side over the other.
Now all reinforcements are laying side-wise one above the other.
Step 5: Fold the sack as shown in the
photo. This method is very gentle to the
more stiffer parts of the glider.
Step 6: At last put the glider into the protection bag.
