18
19
Brake Toggles
In case you switch do another power unit it might be that you have to readjust the
lengths of the brake lines. This adjustment can easy be made on the riser, the original
adjustment which works with most of the power units on the market.the toggles by
10 cm.
Step 1. Open the toggle
knot.
Step 2. Remove the
toggle.
Step 3. Remove the line.
Step 5. Set to setting
option.
Step 4. Undo the loop.
Step 7. Closed the loop.
Step 8. Pass the main line
inside the pulley
Step 9. Close the node
with the main and
auxiliary line.
Step 6. Open the loop.
Confirm that both sides are symmetric.
Make the necessary readjustments and fill the glider on the ground to make
sure that the brakes are working fine before flying with your power glider.
With accelerator - Open trimmer
Measure without quick links
A
A’
B
C
45 cm
45 cm
45 cm
45 cm
