Chapter 1 Getting Started
7
Attach the Hand Strap and Stylus Tether
A hand strap, fine tip capacitive stylus, and tether are
included with the SHC5000.
Hand Strap
To attach the hand strap to the SHC5000, follow the images
below. You can attach it to the right or left side of the
SHC5000:
Stylus Tether
Attach one end of the stylus tether to the stylus. To attach
the tether to the SHC5000, follow these steps:
1. Push the free tether loop through one of the tether
attachment points located on the side of each corner.
2. Insert the stylus with the attached tether through this
loop and tighten the loop.
3. Place the stylus into the stylus storage slot located on
the bottom of the SHC5000.
1
2
3
Summary of Contents for SHC5000
