Sokkia GSR2700 ISX, Operation Manual

Page: 48 / 106

38 GSR2700 ISX Operations Manual
Chapter 5
System Setup
5.2 Setting Up at the Office
An office setup can be used to configure the GSR2700 ISX or to
transfer collected data from the receiver to a PC.
The GSR2700 ISX supports the transfer of data from the receiver’s
memory to a PC in the following ways:
• Using a USB connection to the receiver’s COM2 port.
• Using a Bluetooth connection.
• Using a serial connection to the receiver’s COM1 port.
TIP While all connection types provide reliable methods of
communicating with the GSR2700 ISX, the USB connection is
the fastest method, and is recommended for downloading raw
data files.
If you are using a USB connection to the receiver, you must install
a USB driver to allow communication and high speed download
of data files from your GSR2700 ISX receiver to your PC.
NOTE See Appendix D, Installing the USB Driver , page 75, for more
information.
To set up the GSR2700 ISX in the office:
1. Place the GSR2700 ISX on a desk or other suitable work
surface.
2. Use the USB PC Download cable to connect the PC to the
receiver’s COM2 (white) port (see Section 2.2,
Ports , page 11).
- or -
Use a serial PC Download cable to connect the PC to the
receiver’s COM1 (blue) port (see Section 2.2,
Ports , page 11).
- or -
If you are using a Bluetooth connection, go to step 3.