manualshive.com logo in svg

Sokkia GSR2700 IS, Operation Manuals, Page: 18 / 87

Share
Download
Sokkia GSR2700 IS Operation Manuals Download Page 18

GSR2700 IS Operations Manual

 7

Introduction

Chapter 1

1.5

Icons

The GSR2700 IS uses the display panel and port icons 
summarized in Table 2.

Table 2: Icon Summary

Icon

Meaning

Description & Task

Display Panel LEDs

Battery life

Identifies the gauge that displays the available 
internal and external battery power.

Satellite 
tracking

Identifies the gauge that displays the number of 
satellites currently being tracked by the receiver.

Memory

Identifies the gauge that displays the available 
storage space in the internal memory.

Occupation 
timer

Identifies the gauge that displays the static 
occupation timer.

Bluetooth 
communication 
status

Identifies the Bluetooth communication status 
indicators.

Internal radio 
status

Identifies the internal radio status indicators.

COM status

Identifies the COM port status indicators.

Ports

PWR

Identifies the power port on the underside of the 
GSR2700 IS.

COM1, 
COM2

Identifies the COM1 and COM2 ports on the 
underside of the GSR2700 IS.

Radio antenna

Identifies the internal radio antenna connector on 
the underside of the GSR2700 IS.

Summary of Contents for GSR2700 IS
























































































Reviews:

No comments